It’s an encryption ZIP file – and opening the file or scanning it with AV can break the encryption and consequently the file will be be effective.
- · Please save the file onto a simple USB memory pen (flash drive)
- · Plug the USB flash drive into the rear of the Mako firewall (ensure fully seated) and power on the Mako.
- · Plug the WAN connect into the Mako and connect to the internet.
- · Wait 10 minutes
- · There should be oscillating lights on the front of the Mako
- · Remove USB flash drive and verify that the config.zip file has been removed (this means a successful firmware upgrade)
- · Connect laptop to LAN1 or LAN2 and test connectivity.